Published at Thursday, May 24th 2018, 19:02:49 PM. Kitchen Cabinets. By Didrika Gunther.
Explore your choices for restaining kitchen cabinets also obtain all the info you'll require to offer your kitchen a "stylish facelift". Restaining ˝kitchen cabinets˝ takes some DIY understanding plus a bit of "sweat equity", but it could be a great procedure to offer your kitchen a simple, cost‐effective makeover.
Restaining ˝kitchen cabinets˝ is an easy also inexpensive procedure for turning a worn plus outdated kitchen into something attractive and warm and contemporary. With the right stain as well as a sander and a rag, your “kitchen cabinets“ could be transformed in days.
The first pace in restaining “kitchen cabinets“ is to remove the doors from the 'cabinets' with the cabinets from the wall. Previously removing, be sure to tag all cabinets as well as doors so that you will be able to re‐install them in the right locations together with in the right order.
Next up, unscrew all hardware with incorporating hinges also knobs plus pulls with keep them together in a bag or container. The next pace is to strip the ′old finish′ from your cabinets also doors. Apply ‵gel stripper‵ with a paintbrush to one or two cabinet/door sets at a time (any extra plus the gel will dry out). Let the gel sit for 10 minutes or so until you discern that the veneer has bubbled as well as softened.
Next, scrape the 'old surface' with a scraper with in the way of the grain. Scrape the ′old varnish′ into a container in–conjunction with be sure to ˝wear gloves˝ also work in a well–ventilated area. Scrub any "stubborn spots" with steel wool. Wipe down the stripped veneer with a rag immersed in mineral spirits to remove any stripper remainder together with wipe all clean with a tack rag.
When the doors also cabinets are completely dry, paint on the new finish in long also flat strokes then apply a second coat after six hours of drying. Next, apply at least “two coats“ of defensive polyurethane varnish to the cabinets with utilizing a brush or paint sprayer. Apply one coat with let it dry for '24 hours', then apply another coat. Permit all veneers to dry for ′24 hours′, then re―install the hardware.